- In situ, multi component IR gas analyser
- Low cost of through life ownership
- Proven success in over 2400 applications world wide
Infra-red Gas Analyser
Procal 2000 is an infra-red (IR), duct or stack-mounted gas analyser designed to provide in-stack analysis of up to six, gas-phase emission components.
A typical system comprises an in-situ mounted analyser, an integral calibration function and a Control Unit with options which include a powerful in-situ Heater and a stand-alone Analysis Software package.
Procal 2000 uses the reflective beam principle to directly measure process gas as it enters the sample cell. Unlike higher maintenance extractive systems, Procal’s patented, sintered metal technology removes the need for gas filtering or sample conditioning. The analyser requires very little maintenance and achieves a class-beating up-time of over 98% in demanding applications.
The Procal 2000 infra-red analyser operates on the proven, single beam, dual–wavelength IR light principle. Mid IR Pulses, at two specific wavelengths per monitored component, are transmitted through the sample cell. The ‘measure’ pulse is partially absorbed by the gases being measured while the ‘reference’ pulse remains unaffected. Up to eight wavelengths are available, sometimes sharing reference wavelengths, allowing up to six gas-phase component concentrations to be monitored simultaneously. Unique to the operation, zero and calibration are “fully challenged” in that all operating modes use the same optical path and system components.
The Procal 2000 analyser has been in service for over 25 years with continual product improvement to match ever tightening legislative requirements. Over 2,600 Procal 2000 units are in operation worldwide.
The integral Auto Verification Unit initiates a zero-check on the system by filling the sample probe with clean dry instrument air. Similarly, it performs a span-check by filling the sample probe with certified span gas.
Optional accessories are provided to extend the analyser’s capability in cases of extreme process or ambient variations. Typical examples would be a probe heater to ensure the in-situ gas cell operates above process gas dew point, a gas flow bypass for high thermal stress applications and a head cooler for operation in high ambient temperature conditions.
|Multi-component||Each Procal 2000 can measure up to six components|
|Direct in-situ measurements||No requirement for high cost, high maintenance sample handling system, No modification of the sample.|
|Automatic Auto Zero/Span||No operator adjustment, eliminates drift|
|Dynamic verification (option)||Proof of operation to environmental authorities|
|Integral data logger||At-a-glance record of plant performance and emissions|
|Printout||Daily hardcopy to conform to the authority’s requirements|
|Flange-mounted analyser||Reduced cost of installation|
|Low maintenance||Reduced cost of ownership|
|Zero consumables||Reduced cost of ownership|
|ATEX / IEC||Can be used in hazardous areas (option)|